Yes, you can definitely break down your composite staff for travel!
Please note, as of mid-2017, we switched over to screw-in compression connectors for a more consistent, secure fit. You can still break your staff down for travel - remove screws with a #1 Phillips head screwdriver, stash your screws in a safe place, remove the tubes and voila! Please note that the shortest you can break your staff down is to the length of your carbon fiber shaft.
Be mindful to keep track of the screws - we have heard of several instances where they get lost immediately after detaching the end tubes!
For composite staffs before mid-2017:
Compression connectors are designed to have a tight fit with the polycarbonate tubing for a nice rigid connection. In addition, dirt and dust can create friction inside the tube, making it difficult to twist.
First, be sure you are twisting the tube in the right direction. The holes in the tube should move towards the seam between the two halves of the connector. You may have to twist very hard to release the buttons, and continue twisting while pulling to remove the tube. If you can't do this yourself, ask a friend to help: one of you grab the tube with both hands, the other grab the composite shaft, and twist!
Once the tube is out, be sure both the tube and connector are clean. Rub a tiny bit of petroleum jelly, lip-balm, or similar grease inside the tube before putting it back on.
If you have any questions, please feel free to contact us!